Showing posts with label s30. Show all posts
Showing posts with label s30. Show all posts

Wednesday, September 21, 2011

REAR FLARES

Had a little time to work on the Z today so I got the rear flares mounted where they need to be. Now I can take them off cut the quarters and weld the seam.

 

Sunday, July 31, 2011

DATSUN PROGRESS

....Finally.

Dustin helped me out today and we got the sound deadening all removed. Flat areas were a cake walk with some dry ice to harden the tar. Areas we couldn't get the ice on took some work with a hammer and chisel.

 

Friday, June 24, 2011

UNDER CONSTRUCTION


With Wekfest coming to Dallas at the end of August, I wonder at what point the car will be in. If it's anywhere near where the above Star Road car is in then I might just trailer it up there.

Saturday, June 18, 2011

LONGCHAMPS

Off to Houston, TX to pick up these for a pretty fair price.



After searching for wheels to fit the Z with no luck, I decided that it would actually be cheaper to buy a cheap set and have them custom built to the sizes I need. I'm thinking 15x9 -25 and 15x10 -40 should be right. Any suggestions please comment!

Tuesday, June 14, 2011

REMOVING SPOT WELDS

In nearly every car, body panels and brackets are attached using spot welds. Removing them takes the right tools and a bit of patience. Here's what I used:


Most importantly is the spot weld remover tool. It's basically a small hole saw with an adjustable guide in the center to keep you from drilling into panel underneath. Use a punch to serve as a guide to center the tool then drill away the weld, careful not to drill to deep.


Once the spot welds have been drilled the bracket should just fall off, if not a chisel and hammer will come in handy. Even with the tool it's easy to drill to deep in that case a little welding will be needed to fix the hole.

 

Friday, May 27, 2011

CLEAN SLATE

The Z is back from sand blasting. They did a good job and sure didn't take very long. They did the car and all the panels. Even got the car up on rack and blasted all the underside and suspension. 

Monday, May 23, 2011

HATE WORKING BACKWARDS!

There is probably nothing I hate more than working backwards due to a mistake. I guess that's how you learn. So note to self; Don't put the oil pan on before you install the crank pulley, cause that woodruff key will come out and it will fall into the pan. Yet not far enough to fish it out!


 

OEM

Many times if you know what you're looking for you can find OEM Nissan parts for less than aftermarket. 




  I know it's hard to tell but the new parts are on the right...

Friday, May 20, 2011

WHAT DO WE HAVE HERE?

Fedex dropped off a refrigerator size box with some goods from MSA. 


\/ Click \/

Thursday, May 19, 2011

WORK


Having this sitting in the shop should keep me motivated. And my redline soft mount kit for the carbs came in.
 
The soft mount kit provides reduction in both vibration and heat to the carbs.

Tuesday, May 17, 2011

ENGINE FASTNERS

Been waiting on these for a while, but very much worth the wait. They are from MMS & Accessories, it includes the external bolts for the entire engine all in stainless steel. Even includes the exhaust and intake manifold studs. The kit comes in individually packaged and labeled baggies for easy installation. 

 I'll update as soon as I get the engine all bolted up.

Friday, May 13, 2011

WEBERS

With the car gone for a little while, I got to work on getting the carbs all cleaned up and rebuilt. I think the biggest lesson on rebuilding anything is what you learn by taking it apart. I didn't take any pictures of this process as it's self explanatory. As you take them apart keep everything from one carb separate from the others, staying organized is key.

Find a shop that has a sonic cleaner, this works far better than just soaking it. (make sure they keep your parts separate) 

 Here are all the internal parts in their separate bags. Spray some wd-40 in the bag and work it into all the parts.

Before you start get this book, even if you don't run Webers there's plenty you can learn from this literature. Also needed is a quality rebuild kit (got mine from pegasus racing) and all the tools you used to take the carbs apart. I also got new bearing for the throttle shaft.

Get organized! lay out all your parts so they are easy to find as you put things back together. Also take the extra time to give all the jets and other fuel passages a good extra cleaning.

Do your reading before you start and take your time, clean carbs makes a world of difference down the road.



Tuesday, May 10, 2011

Sunday, May 1, 2011